Description
18V Brushless Hammer Drill Skin DHP481Z
- Battery fuel gauge: the power remaining in a battery can be indicated in 3 stages simply by pushing a button
- XPT (eXtreme Protection Technology) for enhanced protection against dust an dripping water
- Twin LED job light with afterglow function
- Variable speed control by dial
- Mechanical 2 speed gearing
- New Brushless DC motor (BLDC)
- Max. lock torque 125Nm
18V 1/4″ Brushless Impact Driver Skin DTD154Z
- Brushless motor for more power and longer runtimes
- Aluminium hammer case
- One touch bit installation
- Electronic 3 stage impact selection
- T:mode for self drilling screws
- Variable speed control by trigger
- Ergonomically designed handle
18V 125mm Brushless Angle Grinder Skin
- Powerful Brushless DC motor (BLDC)
- Electronic current limiter
- Anti-restart function for safety
- Uses standard 125mm (5?) discs
- Convenient slide switch with lock on
- Battery fuel gauge
- Rotatable gear housing
18V 165mm Brushless Circular Saw Skin DHS680Z
- Powerful Brushless DC motor (BLDC)
- Automatic Torque Drive; automatically increases motor torque according to load conditions
- Magnesium base with 45 and 50 degrees bevel cutting capacity
- Compact and lightweight design
- Rear dust exhaust port
- Twin LED job light with pre-glow
- LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
- Tool hanger for hanging on a ladder or rafter
- Large lock off lever easily operated even with a gloved hand
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
18V Brushless SDS+ Rotary Hammer Skin DHR242Z
- Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200.
- One touch slide chuck for SDS-plus bit.
- Easy-to-grip handle ergonomically designed to: • give maximum power thrust. • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
- 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
- The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
- Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.
18V Brushless Reciprocating Saw Skin DJR187Z
- BL Brushless Motor design
- Newly designed vertical crank mechanism
- Large 32mm stroke length
- Retractable sky hook
- Electronic 2 speed
- Tool-less shoe adjustment
- Tool-less blade change
- LED joblight
7.2/18V Jobsite Radio Bluetooth Skin DMR108
- Bluetooth connectivity – connect wirelessly to a mobile deice with a range of up to 10m
- USB port – charges smart phones and selected tablet devices when plugged into AC power
- AUX-in for playing audio from an external source
- 2x large 89mm diameter speakers provide high quiality sound
- Water and shock resistant IP64 rated
- Dual power sources – AC or Makita Li-ion
- Compatiable with Makita li-ion batteries (7.2V, 10.8V, 12VMAX, 14.4V and 18V)
14.4/18V LED Torch Skin DML802
- Ergonomically designed handle with rubberised grip
- Strap hook can be installed on the upper or lower position in accordance with usage
- 12 position pivoting flashlight head
- Compact size aluminium head
- Multi-faceted reflector controls the direction and spread of the light from LED to provide a sharp round spot light
18V 5.0Ah Lithium-Ion Battery BL1850BL
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 33% more run time per charge compared to BL1830
- Fast 40 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
- Weight: 0.6kg
18V Lithium-ion Dual-Port Rapid Battery Charger
- Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
- Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
- Forced air cooling fan – cools the battery to minimise charging time
- LED charging display
- Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc
Canvas Tool Bag
- Ideal for transport & storage of your favourite Makita tools
- Weather Resistant
- Durable Nylon Cordura Construction
- Internal Pockets feature straps to retain tools during transit
- External pockets enable storage of accessories and more
Kit Includes:
Makita 18V Brushless Hammer Drill Skin DHP481Z
dropdown
- Battery fuel gauge: the power remaining in a battery can be indicated in 3 stages simply by pushing a button
- XPT (eXtreme Protection Technology) for enhanced protection against dust an dripping water
- Twin LED job light with afterglow function
- Variable speed control by dial
- Mechanical 2 speed gearing
- New Brushless DC motor (BLDC)
- Max. lock torque 125Nm
Makita 18V 1/4″ Brushless Impact Driver Skin DTD154Z
dropdown
- Brushless motor for more power and longer runtimes
- Aluminium hammer case
- One touch bit installation
- Electronic 3 stage impact selection
- T:mode for self drilling screws
- Variable speed control by trigger
- Ergonomically designed handle
Makita 18V 125mm Brushless Angle Grinder Skin
dropdown
- Powerful Brushless DC motor (BLDC)
- Electronic current limiter
- Anti-restart function for safety
- Uses standard 125mm (5?) discs
- Convenient slide switch with lock on
- Battery fuel gauge
- Rotatable gear housing
Makita 18V 165mm Brushless Circular Saw Skin DHS680Z
dropdown
- Powerful Brushless DC motor (BLDC)
- Automatic Torque Drive; automatically increases motor torque according to load conditions
- Magnesium base with 45 and 50 degrees bevel cutting capacity
- Compact and lightweight design
- Rear dust exhaust port
- Twin LED job light with pre-glow
- LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
- Tool hanger for hanging on a ladder or rafter
- Large lock off lever easily operated even with a gloved hand
- Compatible with 1.5, 3.0, 4.0 and 5.0Ah Lithium-Ion batteries
Makita 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
dropdown
- Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200.
- One touch slide chuck for SDS-plus bit.
- Easy-to-grip handle ergonomically designed to: • give maximum power thrust. • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
- 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
- The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
- Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.
*Tool Only– drill bit, batteries & charger sold separately.
Makita 18V Brushless Reciprocating Saw Skin DJR187Z
dropdown
- BL Brushless Motor design
- Newly designed vertical crank mechanism
- Large 32mm stroke length
- Retractable sky hook
- Electronic 2 speed
- Tool-less shoe adjustment
- Tool-less blade change
- LED joblight
Makita 7.2/18V Jobsite Radio Bluetooth Skin DMR108
dropdown
- Bluetooth connectivity – connect wirelessly to a mobile device with a range of up to 10m
- USB port – charges smart phones and selected tablet devices when plugged into AC power
- AUX-in for playing audio from an external source
- 2x large 89mm diameter speakers provide high quiality sound
- Water and shock resistant IP64 rated
- Dual power sources – AC or Makita Li-ion
- Compatiable with Makita li-ion batteries (7.2V, 10.8V, 12VMAX, 14.4V and 18V)
Makita 14.4/18V LED Torch Skin DML802
dropdown
- Ergonomically designed handle with rubberised grip
- Strap hook can be installed on the upper or lower position in accordance with usage
- 12 position pivoting flashlight head
- Compact size aluminium head
- Multi-faceted reflector controls the direction and spread of the light from LED to provide a sharp round spot light
Makita 18V 5.0Ah Lithium-Ion Battery BL1850BL
dropdown
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Up to 33% more run time per charge compared to BL1830
- Fast 40 minute charging time
- Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
- Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
- Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
- Star protection computer controls – includes overload protection, over-discharge protection and over heat protection
- The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
- If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
- Weight: 0.6kg
Makita 18V Lithium-ion Dual-Port Rapid Battery Charger
dropdown
- Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
- Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
- Forced air cooling fan – cools the battery to minimise charging time
- LED charging display
- Full charge sound alert USB port provides 1.5A output for charging smart phones, tablets, etc
Makita Canvas Tool Bag
dropdown
- Ideal for transport & storage of your favourite Makita tools
- Weather Resistant
- Durable Nylon Cordura Construction
- Internal Pockets feature straps to retain tools during transit
- External pockets enable storage of accessories and more
Related products
